TRUSCO

TRUSCO

เครื่องมือช่าง (Hand Tool) ความยุ่งยากอย่างหนึ่งในการจัดซื้อจัดหาผลิตภัณฑ์ Hand Tool คือความหลากหลายของเครื่องมือที่ทำอย่างไรจะสามารถตอบสนองความต้องการอย่างครบถ้วนทั้งในด้านคุณภาพและราคาที่เหมาะสม สุมิพลตระหนักถึงปัญหาดังกล่าว จึงได้คัดสรรผลิตภัณฑ์ชั้นนำที่ท่านจะได้รับประโยชน์อย่างคุ้มค่า

TRUSCO: สุดยอดเครื่องมือช่างอันดับหนึ่งจากประเทศญี่ปุ่น มีความโดดเด่นด้านคุณภาพและความพร้อมด้านสต๊อคสินค้าที่ครบครัน

อื่นๆ (Others) ในหมวดนี้เราได้รวบรวมอุปกรณ์ต่างๆที่นอกเหนือจากที่ระบุไว้ในกลุ่มสินค้าต่างๆก่อนหน้านี้ เป็นกลุ่มผลิตภัณฑ์ที่ช่วยอำนวยความสะดวกในการปฏิบัติงานในโรงงาน อาทิ

TRUSCO: รถเข็นเครื่องมือและอุปกรณ์ TRUSCO เป็นที่นิยมอย่างสูงในประเทศญี่ปุ่น ด้วยความโดดเด่นทั้งการออกแบบเรื่องประโยชน์ใช้สอย ความแข็งแรงทนทานและน้ำหนักเบา

สุมิพลเป็นบริษัทไทย ที่ได้รับการแต่งตั้งอย่างเป็นทางการให้เป็น “ผู้จัดจำหน่ายสินค้าจาก Trusco” พร้อมให้บริการสินค้ามากกว่า 18,000 รายการ

Gauge
Gauge
Angle
Angle

Rulers
Rulers
Scriber
Scriber

Gauge

Feeler Gauge
Feeler Gauge (12.7mm Width)
Feeler Gauge
FEATURES

  • Easy to measure the spacing between two flat surfaces, which cannot be done by other measuring instruments
  • Measure the spacing of piston and cylinder part in automobile or engine system

APPLICATION

  • Measurement of gap width

MADE IN

  • Japan

MATERIAL

  • SK Hardened
Feeler Gauge
Feeler Gauge
FEATURES

  • Use for assembly or adjustment of automotive engine components and other internal combustion engine
  • Convenient and useful for continuous measurement of a single space

APPLICATION

  • Measurement of gap width

MADE IN

  • Japan

MATERIAL

  • SK Hardened
Feeler Gauge (Thickness Tape, Stainless Type)
Feeler Gauge
FEATURES

  • Use for assembly or adjustment of automotive engine components and other internal combustion engine
  • Convenient and useful for continuous measurement of a single space

APPLICATION

  • Measurement of gap width

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS304H)
Taper Gauge
Taper Gauge
Taper Gauge
FEATURES

  • Use the width of taper to measure the gap width
  • Hardened stainless steel

APPLICATION

  • Measurement of gap width, etc.

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)
Taper Gauge
Taper Gauge
FEATURES

  • Convenient set of taper gauge 700A with 130mm ruler
  • Folds safely with pocket clip, easy to carry
  • Accuracy : Taper gauge ±0.05mm, ruler ±0.13mm

APPLICATION

  • Measurement of tubing, bore, slot width, hole sizes and flange face to face dimension, etc.

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)
  • Hardened
Taper Gauge
Taper Gauge
FEATURES

  • Use the width of taper to check the inside diameter of tubing or hole size
  • Number of leaf : 4 pieces
  • Hardened

APPLICATION

  • Measurement of slot width and hole size, etc.

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)
Taper Gauge
Taper Gauge
FEATURES

  • Use the thickness of taper to measure the gap width
  • Packed in plastic case for easy to carry
  • Accuracy ±0.04mm

APPLICATION

  • Measurement of groove and gap etc.

MADE IN

  • Japan

MATERIAL

  • Carbon steel for machine structure (S55C)
Taper Gauge for Pipes
Taper Gauge
FEATURES

  • Used to measure hole size or gap width
  • Cylindrical type

APPLICATION

  • Measurement of groove, gap width, hole size, etc.

MADE IN

  • Japan

Welding Gauges

Welding Gauges

Welding Gauges
Welding Gauges
FEATURES

  • Made of stainless steel which is solid and anti-rust
  • Compact size with a hanging case, so easy to carry
  • Can be used to measure undercut and the swelling after pressure welding
  • Bead striding width 53mm

APPLICATION

  • Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.

MADE IN

  • Japan

MATERIAL

  • Body : Stainless steel (SUS420J2)
Welding Gauges
Welding Gauges
FEATURES

  • Made of stainless steel which is solid and anti-rust
  • Compact size with a hanging case, so easy to carry
  • Can be used to measure undercut
  • Easy to read with the rotor graduations on the same surface

APPLICATION

  • Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.

MADE IN

  • Japan

MATERIAL

  • Body : Stainless steel (SUS430)
Welding Gauge
Welding Gauges
FEATURES

  • High accuracy gauge specifically use for undercut
  • Made of stainless steel which is solid and anti-rust
  • Compact size with a hanging case, so easy to carry
  • Maximum measurement value : 2mm
  • Minimum measurement value : 0.2mm

APPLICATION

  • Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.

MADE IN

  • Japan

MATERIAL

  • Body : Stainless steel (SUS410)
  • Spring • Gauge head • Screw : Steel
Welding Gauge
Welding Gauges
FEATURES

  • Made of stainless steel which is solid and anti-rust
  • Compact size with a hanging case, so easy to carry

APPLICATION

  • Measurement during welding process of general welding, construction, Shipbuilding, bridge construction, etc.

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS410)
Welding Gauge
Welding Gauges
FEATURES

  • High precision type model TWG-1
  • Made of stainless steel which is solid and anti-rust
  • Compact size with a hanging case, so easy to carry

APPLICATION

  • Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS410)
Welding Gauge
Welding Gauges
FEATURES

  • Use to measure the size of bead weld
  • fillet throat thickness • groove angle
  • Compact size and light weight
  • Maximum measurement range of bead weld: 8mm
  • Maximum measuring range of fillet weld: 11mm
  • Minimum reading: 0.1mm
  • Beveling angle of: 60° • 70° • 80° • 90°

APPLICATION

  • Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)
Welding Gauge
Welding Gauges
FEATURES

  • Use to measure the size of bead weld fillet throat thickness • groove angle
  • High accuracy digital gauge
  • Maximum measurement range of bead weld: 10mm
  • Maximum measuring range of fillet weld: 20mm
  • Minimum reading : 0.01mm
  • Beveling angle of: 60° • 70° • 80° • 90°

APPLICATION

  • Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.

ACCESSORIES

  • Zero setting master right angle ruler 1 piece, SR44 button cell battery for testing 1 piece

MATERIAL

  • Body : ABS resin (ABS)
  • Measurement face • Scale : Stainless steel (SUS420J2)

Radius Gauge

Radius Gauge
Radius Gauge
FEATURES

  • Use for inspection of construction works, die, moulding parts or R (radius) of circular parts, etc.
  • Made in concave and convex shape

APPLICATION

  • Use for measuring the radius of an object

MADE IN

  • Japan

MATERIAL

  • Cold rolled steel coil (SPCC)
Radius Gauge
Radius Gauge
FEATURES

  • Use for measuring R (radius) of edge of construction works
  • Integrated type of both concave and convex sections

APPLICATION

  • Use for measuring the radius of an object

MADE IN

  • Japan

MATERIAL

  • Cold rolled steel coil (SPCC)

Chamfering Measurement Gauge/ Chamfer Measuring Gauge/ Pitch Gauge/ Acme Screw Pitch Gauge

Chamfering Measurement Gauge
Chamfering Measurement Gauge
FEATURES

  • Minimum reading value: 0.5mm

APPLICATION

  • Use for measuring the size of all kind of chamfering

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)
Chamfering Measurement Gauge
Chamfering Measurement Gauge
FEATURES

  • Chamfering measurement can be easy, quick and accurate to improve work efficiency
  • Accuracy : ±0.03mm

APPLICATION

  • Use for chamfering inspection (45° chamfering)

MADE IN

  • Japan

MATERIAL

  • Stainless steel (thickness 0.6mm) (SUS430)
Pitch Gauge
Pitch Gauge
FEATURES

  • Pitch of general screw can be measured easily and accurately
  • Accuracy : 0.25~1.3(±0.03mm) • 1.4~7.0 (±0.05mm) • 7.5~11.5(±0.07mm)

APPLICATION

  • Use for screw pitch

MADE IN

  • Japan

MATERIAL

  • Cold rolled steel coil (SPCC)
Acme Screw Pitch Gauge
Acme Screw Pitch Gauge
FEATURES

  • Pitch of the acme screw can be measured easily and accurately
  • Accuracy : • 2~7mm(12 pitch~3 1/2)±0.03mm • 8~16mm(3 pitch~1 1/3)±0.05mm 20mm(1 pitch)±0.05mm

MADE IN

  • Japan

MATERIAL

  • Stainless steel (thickness 0.8mm) (SUS430)

Drill-Tip Gauge/ Drill-Point Gauge/ Center Gauge/ Angle Gauge Set

Drill-Tip Gauge
Drill-Tip Gauge
FEATURES

  • 8 types of edge angle are useful when grinding

APPLICATION

  • Use for measuring drill-tip after grinding

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)
Drill-Point Gauge
Drill-Point Gauge
FEATURES

  • Use for measuring the drill edge length 3mm ~ 45mm and right and left angles can be measured at the same time

APPLICATION

  • Measurement length and angle of drill edge

MADE IN

  • Japan

MATERIAL

  • Main scale • Rotor : Stainless steel (SUS420J2) • Base : Rolling material for general structure (SS400)
Center Gauge
Center Gauge
APPLICATION

  • Use for inspection of the angle of lathe center, angle of the tool for screw cutting

MADE IN

  • Japan
Angle Gauge Set
Angle Gauge Set
FEATURES

  • The gauge use for angle inspection
  • Accuracy : ±10′

APPLICATION

  • Use for inspection of internal angle, angle of 14 1/2° acme screw

MADE IN

  • Japan

MATERIAL

  • Cold rolled steel coil (SPCC)

Angle

Protractor/ Mini Protractor/ Universal Bevel Protractor
Protractor
Protractor
FEATURES

  • The blade can be locked

APPLICATION

  • Instrument for measuring the angle of work piece

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)
Protractor(Silver Finish)
Protractor(Silver Finish)
FEATURES

  • Useful for high precision measurement with the blade which can be firmly locked
  • Silver finish surface to suppress light glossy, easy reading scale
  • 1mm step of two rows upper and lower scale on one side

APPLICATION

  • Angle measurement

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)
Mini Protractor (2-Blade Type)
Mini Protractor (2-Blade Type)
FEATURES

  • Compact size for convenience
  • Dual blades

APPLICATION

  • Angle measurement

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)

Protractor Blade Type
FEATURES

  • Use for measuring sharp angle
  • The blade can be locked
  • Clear and fine graduation
  • Silver finish surface to suppress light glossy, easy reading scale
  • 1 mm step of two rows upper and lower scale on the one side

APPLICATION

  • Angle measurement

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)
Protractor (2-Blades Type)
Protractor (2-Blades Type)
FEATURES

  • The blade can be locked
  • Silver finish surface to suppress light glossy, easy reading scale

APPLICATION

  • Angle measurement

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)
Protractor (Stainless Steel)
Protractor (Stainless Steel)
FEATURES

  • Easy reading scale
  • Easy to adjust the angle

APPLICATION

  • Angle measurement of machines, molds and jigs

MADE IN

  • Japan

MATERIAL

  • Steel

Rulers

Straight Rule/ Square
Straight Rule
Straight Rule
FEATURES

  • Blast finishing to suppress the glossiness for easy reading
  • Trivalent chrome plated for environmental friendly
  • Etching scale, for long life use
  • Inch conversion table, screw hole diameter chart attached

APPLICATION

  • Line drawing •Marking work •Dimensional measurement

MADE IN

  • Japan

MATERIAL

  • Stainless steel (SUS420J2)
Square
Square
FEATURES

  • Convenient for marking work

APPLICATION

  • Measurement of right angle and length

MADE IN

  • Japan

Scriber

Automatic Carbide Punch/ Carbide Tipped Center Punch/ Super Hard Auto Punch/ Pencil-Type Scriber/ Scriber/
Carbide-Tipped Tool Set/ Steel Compass/ Compass with Carbide Tip
Automatic Carbide Punch
Automatic Carbide Punch
FEATURES

  • Unnecessary to use a hammer for this auto return type

MADE IN

  • Japan

MATERIAL

  • Carbide tip G5

Carbide Tipped Center Punch
FEATURES

  • Using for marking the center of work piece or notching center

APPLICATION

  • Carbide tip G5
  • Body : Carbon steel for machine structure (S55C)

MADE IN

  • Japan
Super Hard Auto Punch
Super Hard Auto Punch
FEATURES

  • Unnecessary to use a hammer in punching work
  • Strong/weak adjustment for wood material up to stainless steel and can be punched accurately by one hand or even
    at overhead
  • Dimension line drawing on the surface of work piece

MADE IN

  • Japan
Pencil-Type Scriber
Pencil-Type Scriber
FEATURES

  • Dimension line drawing on the surface of work piece or put out the axis
  • Use for marking work of iron, steel, brass, aluminum, plastic and other alloy

MADE IN

  • Japan

MATERIAL

  • Carbide tip G2
  • Body : Plastic (PVC)
  • Grip : Brass
Scriber
Scriber
FEATURES

  • Use for dimension line drawing on the surface of work piece or put out the axis

MADE IN

  • Japan

MATERIAL

  • Grip: Plastic (PF)
Scriber (with Carbide Tip)
Scriber
FEATURES

  • Use for dimension line drawing on the surface of work piece or put out the axis

MADE IN

  • Japan

MATERIAL

  • Carbide tip G2
Carbide-Tipped Tool Set
Carbide-Tipped Tool Set
FEATURES

  • Portable with PVC case for 3 pieces storage

MADE IN

  • Japan

SET DETAILS

  • 1. Scriber KB-KW 1Pc.
  • 2. Center punch TCP-M 1Pc.
  • 3. Compass TPC-150 1Pc
Carbide-Tipped Tool Set
Carbide-Tipped Tool Set
FEATURES

  • Frequently- used tools in a steel case

MADE IN

  • Japan

SET DETAILS

  • Scriber KW-KW 1Pc.
  • Compass PTC-100 1Pc./ PTC-150 1Pc./ PTC-250 1Pc.
  • Center punch TCP-S 1Pc./ TCP-M 1Pc.
  • Caliper 150mm 1Pc.
  • Silver scale 150mm 1Pc
Steel Compass
Steel Compass
FEATURES

  • Use for line dividing or equal dividing
  • Using in marking work

MADE IN

  • Japan

MATERIAL

  • Carbon steel for machine structure (S55C) with anti-rust coating after grinding finish
  • Body: Carbon steel for machine structure(S55C)
Compass with Carbide Tip
Compass with Carbide Tip
FEATURES

  • Carbide tip attached

MADE IN

  • Japan

MATERIAL

  • Body : Carbon steel for machine structure (S55C)
  • Tip : Carbide tip G2