Pressure-Resistant

LINE POWER-AT


Structural drawing


Example of coupling installation .1

Example of coupling installation .2

Example of coupling installation .3

Features

  • Max allowable pressure is 1.00MPa{10.2 kgf/㎠} (at room temperature), good pressure durability, and a structure of less elongation during pressuring
  • As the inside layer is of abrasion resistant rubber, abrasion resistance is good.
  • Strong resistance to outside pressure, with little deformation

Application

  • For suction/delivery of muddy water for construction sites using the shield method of muddy water, the reverse method, etc.
  • For suction/delivery of muddy water at normal construction sites
  • For suction/delivery of sand, gravel, sludge, etc.
  • For dredging, filling-in
  • For suction/delivery of powder, pellets such as cement
  • For transportation of high-density material and for high-elevation delivery
Fluid Water・hot water、Powder・granule、mortar
Material rubber
Temperature -10 ~ 50
Function
  • Pressure resistant 1.0MPa (10.2kgf/㎠)
  • Abrasion resistant
  • High anti-static performance (with no ground wire)

STANDARD DIMENSION AND PROPERTIES

Shime-TAC for LINE POWER-AT

Features

  • Allowable pressure of TOTAKU LINE POWER-AT with which SHIME-TOTAKU coupling is connected is equal to that of the hose only.
  • Attaching and detaching work of the couplings on the job site is easy.
  • (Note) Please use iron couplings only for SHIME-TOTAKU.

Size Type

  • Nominal Dia. of 50, 65, 75, 100mm are available. (Note)PT Nipple made of the resin is available only in sizes of 38 and 50mm.
  • S-Collar Nipple, M1 Nipple, Nipple with JIS10KF, Both Mouth Nipple (made of iron or SUS) and Kamlok (made of SUS) are available.

STANDARD DIMENSION AND PROPERTIES

Nominal diameter T W H Bolt size
50 113 63 79 M8
65 131 78 97 M8
75 153 90 112 M10
100 182 105 142 M10

LINE POWER-WA


Structural drawing


Example of coupling installation

Features

Because the max allowable pressure is 1.50MPa {15.3kgf/cm2} (at room temperature), it has excellent pressure-resistance among pressure-resistant and abrasion resistant hoses.

Application

  • For suction & pressure conveyance of cooling water and muddy water.
  • For suction & pressure conveyance of manufacturing plants, shipyards, and other construction sites.
Fluid Water・hot water、Powder・granule、mortar
Material rubber
Temperature -20~80・90 (suction)
Function
  • Pressure resistant 1.5MPa (15.3kgf/㎠)
  • Aabrasion resistant
  • Anti-static effect (with ground wire)
  • Heat resistant

STANDARD DIMENSION AND PROPERTIES