ABRASION RESISTANT

TAC HERAN


Structural drawing


Example of coupling installation

Features

  • With abrasion resistant rubber, about three times as strong as “TAC SD-A” in abrasion resistance.
  • With abrasion resistant rubber, excellent in anti-static effect.

Application

  • For suction/delivery using vacuum conveyors and shooters in industrial factories, vessels, shipyards,construction sites and for the maintenance of environmental protection.
  • For suction/delivery of slurry, cement, crushed rock,iron ore, etc.
  • For suction/delivery of cereals like, paddy, rice,wheat, etc.
Fluid Water・hot water、Powder・granule
Material rubber
Temperature -20 ~ 50
Function
  • Abrasion resistant
  • High anti-statics performance (with no ground wire)

STANDARD DIMENSION AND PROPERTIES

TAC HERAN-N


Structural drawing


Example of coupling installation

Features

  • Model resistant to hot wind of 100 °C (designed for resistance to hot wind of a maximum of 120 °C in straight installation)
  • Model safety improved by grounding effect with steel wires as well as conductive rubber.
  • Less ozone degradation compared to TAC HERAN.
  • Excellent weather resistance

Application

  • For transportation using vacuum conveyors, shooters,etc in industrial factories, shipping, shipyards and construction sites.
  • For transportation of slurry, sintered cement, gravel,iron ore, etc
  • For transportation of cereals such as paddy rice, rice,wheat, etc during harvesting.
Fluid Water・hot water、Powder・granule
Material rubber
Temperature -20~50・80 (suction)・100 (hot wind)・120 (hot wind in straight installation)
Function
  • Heat resistant
  • Abrasion resistant
  • High anti-statics performance (with a ground wire)

STANDARD DIMENSION AND PROPERTIES

TAC HERAN-CL

Features

  • Abrasion resistance four times as much as TAC HERAN-N
  • Comparison made in respect of a worn volume during 8 hours from the start of test.
  • Transparent wall enables visual check of the material flow.
  • Embedded grounding wire gives an excellent antistatic effect.
  • With very smooth inner wall, you can get increased flow capacity.

Application

  • For transportation of slaked lime and activated carbon at garbage incineration plant.
  • For transportation of powder, granule, grain or other fine particles where static electricity is apt to generated.
  • For suction and discharge of sintering cement, gravels and iron ore, etc.
Fluid Water・hot water、Powder・granule
Material other (polyurethane resin
Temperature -10 ~ 50
Function
  • Abrasion resistant
  • High anti-statics performance (with a ground wire)
  • Having transparency

STANDARD DIMENSION AND PROPERTIES

TAC HERAN ACE

Features

  • Abrasion resistance four times as much as TAC HERAN-N.
  • Translucent wall enables visual check of the material flow and easy detection of a clogged portion.
  • Light weight and flexible.
  • Pressure-resistant performance against maximum allowable pressure of 0.5MPa1(5.1kgf/cm2).
  • With reinforcing fiber, this hose is quite durable and most suitable for using at the uneven place where the hose is subject to elongation load.
  • Embedded grounding wire gives an excellent anti-static effect.

Application

  • For transportation of slaked lime and activated carbon at garbage incineration plant.(Specially, recommendable for using at a place where small bending radius is required.)
  • For suction of earth and sand in the “shield” construction method.
  • For suction and conveyance of crushed stone and ore.
  • Hose of damper exclusive use.
Fluid Water・hot water、Powder・granule
Material other (polyurethane resin
Temperature -10 ~ 50
Function
  • Abrasion resistant
  • High anti-statics performance (with a ground wire)
  • Pressure resistance 0.5MPa (5.1kgf/㎠)
  • Having transparency

STANDARD DIMENSION AND PROPERTIES