Sealant and Adhesive Supply Systems

Download PDF


General Industry Supply Systems

General Industry Supply Systems

General Industry Supply Systems deliver one-component sealants, adhesives and grease from 200 or 60 liter drums to metering and dispensing systems. Reliable performance at an affordable price.

Features

  • Assembled in Suzhou for fast delivery
  • Optional DataTrak™ accessory allows machine monitoring
  • Optional PLC Interface accessory allows a PLC to directly read the low level and cycle count sensors, and stop and start the pump
  • Optional Light Tower accessory is available to indicate system diagnostics

SmartWare Technology

SmartWare Technology

The SmartWare Shot Dispense Kit contains everything you need to convert your existing Graco pump into a dosing system. It’s an accurate, economical way to dose material – saving you time, material and labor costs.

Compatible with DuraFlo or CheckMate pumps with NXT Air Motor technology and most Graco Supply Systems

Features

  • Allows you to dose a preset amount of single-component material with your Graco pump
  • A great alternative to manual methods such as mechanical counters, scales or custom systems
  • An economical alternative to fully automated systems
  • Shot size ranges from 6 cc’s to 1000 gal (3,785 L)
  • Accuracy ranges from 0.25 to 4%, depending on material and shot size
SmartWare Shot Dispense Kit
Power Supply Requirements 100 – 240 Vac, 50/60 Hz, single phase, 1.2 amps max
Pressure Transducer Manifold
Maximum Working Fluid Pressure 52.5 MPa/5.25 bar
Ambient Operating Temperature Range 0 to 49° C
Operating Humidity Range 0 – 90% non-condensing

Supply Systems

Supply Systems

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

For large drums up to 200 liter (55 gal)

  • Graco D200 – For high-volume in-plant applications
  • Graco D200s – For heavy-duty, high-volume applications of high-viscosity materials. Provides more down-force for difficult-to-move materials

For pails up to 60 liter (16-gal)

For 20, 30 and 60 liter (5, 7, and 16-gal) pail sizes. Provides the same proven technologies as the larger systems, but with small NXT Air Motors.

  • Graco L20c – A lightweight, elevator ram on a cart
  • Graco S20 – For low-volume applications of medium to high-viscosity materials
  • Graco S20c – Same as the S20, but includes a cart
  • Graco D60 – Provides higher down-force and 60-liter pail capacity

Features

  • Industry-first controls give you immediate and important information at the touch of a button
  • Quick placement of drum or pail
  • Platen wipers can be replaced in seconds
  • Pump’s quick-disconnect coupler, turbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
  • High-quality, durable parts reduce maintenance time, maximize uptime

Specification

Supply Systems
Max air input pressure (supply system) / Air inlet size
L20c – 2 in elevator, 5 gal (20 l) 0.7 MPa, 7 bar / 1/2 npsm(f)
S20 – 3 in single post, 5 gal (20 l) 0.9 MPa, 9 bar / 1/2 npt(f)
D60 – 3 in dual post, 16 gal (60 l), 5 gal. (20 l), 30 gal 1.0 MPa, 10 bar / 3/4 npt(f)
D200 – 3 in dual post, 55 gal (200 l), 30 gal (115 l),16 gal (60 l), 8 gal (30 l), 5 gal (20 l) 1.0 MPa, 10 bar / 3/4 npt(f)
D200s – 6.5 in dual post, 55 gal (200 l), 30 gal (115 l) 0.9 MPa, 9 bar / 3/4 npt(f)
Max fluid, air working pressure. and weight (displacement pump)
For Check-Mate pump packages, see manual 312376. For Dura-Flo pump packages, see manuals 311826, 311828, 311833.
Pump Wetted parts
For Check-Mate displacement pumps, see manual 312375. For Dura-Flo displacement pumps, see manuals 311717, 311825, 311827.
Platen Codes: Part number; Wetted parts
B : 257727, 5 gal (20 l), J : 257732, 8 gal (30 l), S : 257737, 16 gal (60 l) Electroless nickel, polyurethane, nitrile, carbon steel, polyethylene, zinc plated carbon steel, buna, 316 sst, 17-4PH sst
C : 257728, 5 gal (20 l), K: 257733, 8 gal (30 l), T: 257740, 16 gal (60 l) Electroless nickel, polyurethane, carbon steel, polyethylene, nitrile, zinc plated carbon steel, buna, 316 sst 17-4PH sst
F : 257729, 5 gal (20 l), L : 257734, 8 gal (30 l), U : 257738, 16 gal (60 l) Stainless steel, polyurethane, PTFE coated nitrile, polyethylene, nitrile, PTFE, 303 sst, 304 sst, 316 sst, 17-4PH sst
G : 257730, 5 gal (20 l), M : 257735, 8 gal (30 l), W : 257739, 16 gal (60 l) Electroless nickel, aramind reinforced elastomer, rubber- based PSA, nitrile, polyethylene, zinc plated carbon steel, buna, 1018 carbon steel, 304 sst, 316 sst, 17-4PH
H : 257731, 5 gal (20 l), R : 257736, 8 gal (30 l), Y : 257741, 16 gal (60 l) Electroless nickel, aramind reinforced elastomer, rubber- based PSA, polyurethane, polyethylene, nitrile, zinc plated carbon steel, buna, 1018 carbon steel, 304 sst, 316 sst, 17-4PH sst
7 : 255661, 30 gal (115 l) zinc plated carbon steel, EPDM, sst, fluoroelastomer
8 : 255662, 55 gal (200 l) PTFE, EPDM, PTFE coated aluminum, zinc plated carbon steel, 316 sst
9 : 255663, 55 gal (200 l) EPDM, aluminum, zinc plated carbon steel, 316 sst
A : 255664, 55 gal (200 l) PTFE, neoprene, aluminum, zinc plated carbon steel,
Ambient operating temperature range (supply system)
0- 49°C
Sound data
See separate air motor manual.
External power supply requirements (DatraTrak)
AC power units 100-240 Vac, 50/60 Hz, single phase, 1.2 amps max
DC power units 24 Vdc, 1.2 amps max draw

Warm Melt Supply Systems

Warm Melt Supply Systems

Designed specifically for sealants or adhesives that need to be warmed up to 100°C (212°F), Graco Warm Melt Supply Systems deliver superior temperature control. Ideal for temperature conditioning applications. An excellent alternative to water-jacketed solutions.

Features

  • Bridges the gap between hot melt and ambient supply systems
  • Modular approach provides easy snap-on installation and eliminates complex point-to-point wiring
  • Intuitive, easy-to-use interface
  • Configurable to fit your unique application and material

Specification

Warm Melt Supply Systems
Maximum Air Input Pressure
D60 10 bar, 1 MPa
D200 10 bar, 1 MPa
D200s 9 bar, 0.9 MPa
Platen Wetted Parts (By Platen Code and Part Number)
F: 257729, 5 gal (20 l) Stainless steel, polyurethane, PTFE coated nitrile, polyethylene, nitrile, PTFE, 303 sst, 304 sst, 316 sst, 17-4PH sst
L: 257734, 8 gal (30 l)
U: 257738, 16 gal (60 l)
H: 257731, 5 gal (20 l) Electroless nickel, aramind reinforced elastomer, rubber-based PSA, polyurethane, polyethylene, nitrile, zinc-plated carbon steel, buna, 1018 carbon steel, 304 sst, 316 sst, 17-4PH sst
R: 257736, 8 gal (30 l)
Y: 257741, 16 gal (60 l)
8: 255662, 55 gal (200 l) PTFE, EPDM, PTFE coated aluminum, zinc-plated carbon steel, 316 sst
9: 255663, 55 gal (200 L) EPDM, aluminum, zinc-plated carbon steel, 316 sst
Displacement Pump See Check-Mate Displacement Pump and Pump Packages for wetted parts, weight, flow rate, and maximum fluid and air working pressure
Maximum Operating Temperature (Supply System) 70°C
Sound Data See NXT Air Motor
External Power Supply Requirements
AC Power Units 220-250 Vac, 50/60 Hz, single phase, 57 amps full load current